萝l在线精品社区资源-轮流发生性关系小说-轮流操-沦为奴小说-走绳play-纵情小说

HDS series of waste oil catalytic cracking distillation refining equipment

Use range

Products are widely used in petroleum, waste oil (engine oil, transformer oil, textile industry with spindle oil, refrigeration oil, vacuum pump, a variety of rotating machinery lubricants, heat transfer oil, etc.) catalytic vacuum distillation, chemical, cement, metallurgy Machinery, bearings, mining, power, shipbuilding, coal, military, aerospace, automotive, rubber and plastics, instrumentation, transportation, building materials, die-casting, paper and other fields.

Technical characteristics

1、 The use of the United States Clare composite catalytic technology, waste oil of the harmful substances were selectively carried out polymerization, shielding, passivation and other treatment. So as to restore the regeneration, as a qualified base oil; to avoid the traditional sulfuric acid distillation, oil distillation catalytic hydrogenation technology shortcomings. The company's technology of this process is: the recovery of various waste oil (including steam, diesel engine oil and other almost all of the waste oil can be recycled) for catalytic treatment, and then after the distillation of base oil.

2、 The cracking equipment used in the United States Keli full bridge rectifier, electromagnetic medium heating technology, through the polymer bleaching decolorization, falling film separation of oil for distillation treatment, the treatment process is not only heat evenly, the flow balance, and must Do not destroy the oil molecular structure and oil film.

3、 The treatment process will not cause secondary pollution: the process without waste gas, waste water discharge, distillation process in the last distillation residue can be used as fuel;

4、 Good product quality: no oxidation of color, no odor generated;

5、 Low processing costs, high recovery rate;

Principle and process

1、The waste oil to be treated in the chemical processor and the catalyst fully mixed after mixing, and then through the pump, heater (heating source available electricity, fuel oil, natural gas, coal, etc.) and the reactor cycle heating distillation, which out Of the oil vapor after three cooling cooling reduced to liquid, were collected in water, gasoline and diesel, base oil and heavy oil and other collectors. The exhaust gas is sent to the furnace through the boiler exhaust or burned through a dedicated exhaust gas processor to ensure zero emissions of the exhaust gas, residual waste for fuel reuse, and environmental pollution.

2、 Waste oil by removing mechanical impurities, into the reactor, adding a composite catalyst, stirring at room temperature under normal pressure. After the catalytic treatment of raw materials through the pump into the intermittent distillation kettle, under high vacuum vacuum distillation conditions, followed by steaming water, fuel oil, a variety of boiling range of base oil, and then after a special condensing cooling recovery; Of the gas through a dedicated exhaust gas processor for purification treatment.

Technical parameters